CATEGORIES
FEATURED PRODUCTS
Digicon Series/
General Duty Modulating Electric Vavle Actuators
The digicon® series represents the company’s quarter-turn(part-turn) electric modulating actuators.
Torque range from 20NM to 6000NM.
Both Male and Female type available.
Prefix meaning:
"Digi" stands for "digital",
"Con" for "control",
"Digicon" symbolizes control technology centered around digital technology.
Introduction
Built to Meet Every Actuation Need
The Digicon series is our modulating acutators for everyday use and is engineered for durability, compact size, and easy installation. It’s made for applications requiring higher precision or continuous flow regulation, supporting duty cycles up to 80%. Its ultra-compact body reduces the spatial issues often encountered in today’s dense piping networks and control environments. The mounting base adheres to international interface standards, and users can choose either a female drive or an optional male drive to allow direct connection to a broad range of valves. Constructed from high strength diecast aluminum, the enclosure provides long term reliability that typically surpasses the service life of the valves it operates.
Offering adjustable torque levels from 20 Nm to 6000 Nm, the Series is suitable for an extensive range of actuation requirements. It accommodates everything from ball valves near from DN15 to DN500 and butterfly valve from DN25 to DN1000. The rugged housing is suitable for both indoor control panels and outdoor installations exposed to sun, rain, and temperature variation. The actuator operates reliably within a wide temperature range of -40°C to 55°C, incorporates F class insulation for superior thermal protection and motor longevity, and is IP68 rated for complete protection against dust and prolonged water exposure.
Built to Meet Every Actuation Need, the Digicon series offers consistent performance and reliability for everyday industrial use.
Features & Advantages
Functionality Performance & Integration
Ultra Compact and Lightweight
Truly bracket-free - only 35% of the size and weight of products in the same class with ISO 5211 direct mount.
Smart Control
Built-in smart control module, eliminating the need for
external positioners.
Customization Options
Shaft types, male/female, BLDC motor, overload protection,
explosion-proof etc.
Versatile Power Option
AC220V, AC110V, DC24V, AC24V, AC380V
High-Speed Option
Full travel time adjustable to 5s, 10s, 15s, 30s, or 60s. Proprietary patented design enables significantly increased speed and minimal heat generation.
Reliability & Durability
Certified Safe
Tested with 1500V withstand voltage, F-class insulation, CE compliant.
Robust Build
Die-cast aluminum housing with a refined, smooth finish to reduce electromagnetic interference. Integrated worm gear output shaft made of specially forged copper alloy, offering high strength and excellent wear resistance.
Wide Environmental Compatibility
No lubrication or inspection needed. IP68 waterproof, rustproof, and supports angle-free installation.
Position Feedback
Clear visual indicator for quick status check.
Series Specification
Typical Applicable Valve Sizes
Torque Output
20 to 6000 Nm
Input/Output Signal
4-20mA or 2-10VDC
Voltages
220V AC Single-Phase
110V AC Single-Phase
380V AC Three-Phase
24V DC
220V DC
Materials
Mounting/Shaft: Copper Alloy
Base: Diecast aluminum alloy
Cover: Diecast aluminum alloy
Cover and Base Finish: Powder coated epoxy
ISO 5211 Direct Mount Connections Flange
F05 / F07 / F10 / F12 / F14 / F16 / F25
Drive shaft
Female or Male drive shaft
Temperature Range
–40°C (space heater required) to 55°C
–40°F (space heater required) to 131°F
Electric Motor
F class insulation
Passes 1500 V dielectric withstand testing
Enclosure Rating
IP68
Electrical Connection
PF1/2" conduit
Lubrication
Molybdenum based grease, permanent and effective
Ball valves
DN15-DN500
Butterfly valves
DN25-DN1000
Options & Add-Ons
Viewing window type
Flat or spherical
Drive connection
Female output drive or male output drive
Outer cover colour
Black, blue, or gray housing
Output shaft types
Four square, round hole, double D, or keyed output shaft
Handwheel
Manual handwheel with mechanical disengagement
Power outage return
Preset fail open or fail close operation during power loss
Electronic overload protection
Bidirectional electronic overload protection with output terminals
Brushless DC motor drive
Brushless DC motor drive with high efficiency and minimal heat output
Current position feedback
Current position transducer for valve position feedback
Advanced H class configuration
High temperature resistant components with enhanced environmental protection
Product Specifications
Model | Power Supply | Torque (Nm) | Stroke time for 50Hz 50Hz | Motor Power (in/out) | Input Signal | Output Signal | Weight | IP Class |
|---|---|---|---|---|---|---|---|---|
dogicon-5 | DC24V AC24V AC220V AC110V | 50 | 30 | 30W/10W | 4-20mA 0-10V | 4-20mA 0-10V | 3 | IP68 |
dogicon-10 | DC24V AC24V AC220V AC110V | 100 | 30 | 80W/23W | 4-20mA 0-10V | 4-20mA 0-10V | 4.5 | IP68 |
dogicon-25 | DC24V AC24V AC220V AC110V | 250 | 30 | 150W/45W | 4-20mA 0-10V | 4-20mA 0-10V | 7.5 | IP68 |
dogicon-50 | ADC24V AC220V AC110V | 500 | 30 | 300W/90W | 4-20mA 0-10V | 4-20mA 0-10V | 8.7 | IP68 |
dogicon-100 | DC24V AC24V AC220V AC110V | 1000 | 50 | 300W/90W | 4-20mA 0-10V | 4-20mA 0-10V | 12.8 | IP68 |
dogicon-200 | AC220V AC110V | 2000 | 100 | 300W/90W | 4-20mA 0-10V | 4-20mA 0-10V | 12.8 | IP68 |
dogicon-400 | AC220V AC110V | 4000 | 150 | 500W/150W | 4-20mA 0-10V | 4-20mA 0-10V | 32 | IP68 |
dogicon-600 | AC220V AC110V | 6000 | 150 | 500W/150W | 4-20mA 0-10V | 4-20mA 0-10V | 32 | IP68 |
Note:
All parameters are not limited to the datasheet. Parameters such as torque, stroke time, inner bore dimensions, and other key metrics can be customized to meet specific application requirements.
Digicon-Lxx: Linear option with position indicator light.
Options/Add-ons
Diagrams & Drawings
For dimensional drawings, please refer to the product page corresponding to the applicable torque.