top of page

HOME   /   PRODUCTS   /    

SAFE Actuator

CATEGORIES

SAFE 24 V Safe-Voltage Electric Valve Actuators

SAFE-50 24 V safe-voltage electric valve actuator
Short Introduction:

AOITEC SAFE actuators are 24 V safe-voltage electric actuators for quarter-turn valves. They gather energy quietly between operations and release it in a burst the moment the valve has to move, so thin cable and a small power supply deliver high torque. The range covers 50–6000 Nm and the same unit runs on 24 V DC or AC. Even SAFE-600 needs only a 3.6 A supply. Every model is IP68 rated and driven by our patented brushless DC control.

FEATURED PRODUCTS
Features & Benefits

Safe Voltage, Safe People and Equipment:

Powered by 24 V safe voltage, so the major electrical risks to personnel are eliminated.

​

High Torque at Safe Voltage:

Up to 6000 Nm, all inside safe-voltage limits.

​

DC 24 V or AC 24 V, One Unit:

Connect to whichever supply the site has. Extremely convenient to use.

​

Low Current, Thin Cable, Small Supply:

No thick cables and no high-power power supplies. Even SAFE-600 runs from a 3.6 A supply.

​

Patented Brushless DC Control:

Reliable and efficient drive from our patented brushless DC control technology.

​

Protected from Thermal Burnout:

With no continuous high-energy influx, the motor is protected from burnout by excessive heat.

Specifications
Model
Power Supply
Torque (Nm)
Stroke Time (sec)
Motor Power (W)
Supply Required Minimum
Weight (kg)
IP Rating
Cable Minimum
SAFE-5
24 V DC / AC
50
6
20
1 A
2.5
IP68
26 AWG
SAFE-10
24 V DC / AC
100
10
20
1 A
3.6
IP68
26 AWG
SAFE-25
24 V DC / AC
250
20
30
1 A
7.5
IP68
26 AWG
SAFE-50
24 V DC / AC
500
30
50
2 A
7.5
IP68
22 AWG
SAFE-100
24 V DC / AC
1000
60
50
2 A
12
IP68
22 AWG
SAFE-200
24 V DC / AC
2000
120
50
2 A
12
IP68
22 AWG
SAFE-400
24 V DC / AC
4000
100
100
3.6 A
31
IP68
16 AWG
SAFE-600
24 V DC / AC
6000
150
100
3.6 A
31
IP68
16 AWG

Note:

- Torque in inch-pounds: multiply Nm by 8.85.

- Cable gauge is the minimum conductor size; confirm the maximum cable run for your installation with AOITEC.

- Parameters such as voltage, torque, stroke time and inner bore dimensions can be customised to meet specific application requirements.

​

Typical application:

Water and wastewater, HVAC and building services, marine, general industrial automation, and remote sites running on batteries or solar power.

Get A Quote
bottom of page